Subnet-EVM API

Subnet-EVM APIs are identical to Coreth C-Chain APIs, except Avalanche Specific APIs starting with avax. Subnet-EVM also supports standard Ethereum APIs as well. For more information about Coreth APIs see GitHub.

Subnet-EVM has some additional APIs that are not available in Coreth.

`eth_feeConfig`

Subnet-EVM comes with an API request for getting fee config at a specific block. You can use this API to check your activated fee config.

Signature:

eth_feeConfig([blk BlkNrOrHash]) -> {feeConfig: json}

blk is the block number or hash at which to retrieve the fee config. Defaults to the latest block if omitted.

Example Call:

curl -X POST --data '{
    "jsonrpc": "2.0",
    "method": "eth_feeConfig",
    "params": [
        "latest"
    ],
    "id": 1
}' -H 'content-type:application/json;' 127.0.0.1:9650/ext/bc/2ebCneCbwthjQ1rYT41nhd7M76Hc6YmosMAQrTFhBq8qeqh6tt/rpc

Example Response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": {
    "feeConfig": {
      "gasLimit": 15000000,
      "targetBlockRate": 2,
      "minBaseFee": 33000000000,
      "targetGas": 15000000,
      "baseFeeChangeDenominator": 36,
      "minBlockGasCost": 0,
      "maxBlockGasCost": 1000000,
      "blockGasCostStep": 200000
    },
    "lastChangedAt": 0
  }
}

`eth_getChainConfig`

eth_getChainConfig returns the Chain Config of the blockchain. This API is enabled by default with internal-blockchain namespace.

This API exists on the C-Chain as well, but in addition to the normal Chain Config returned by the C-Chain eth_getChainConfig on subnet-evm additionally returns the upgrade config, which specifies network upgrades activated after the genesis. Signature:

eth_getChainConfig({}) -> {chainConfig: json}

Example Call:

curl -X POST --data '{
    "jsonrpc":"2.0",
    "id"     :1,
    "method" :"eth_getChainConfig",
    "params" :[]
}' -H 'content-type:application/json;' 127.0.0.1:9650/ext/bc/Nvqcm33CX2XABS62iZsAcVUkavfnzp1Sc5k413wn5Nrf7Qjt7/rpc

Example Response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": {
    "chainId": 43214,
    "feeConfig": {
      "gasLimit": 8000000,
      "targetBlockRate": 2,
      "minBaseFee": 33000000000,
      "targetGas": 15000000,
      "baseFeeChangeDenominator": 36,
      "minBlockGasCost": 0,
      "maxBlockGasCost": 1000000,
      "blockGasCostStep": 200000
    },
    "allowFeeRecipients": true,
    "homesteadBlock": 0,
    "eip150Block": 0,
    "eip150Hash": "0x2086799aeebeae135c246c65021c82b4e15a2c451340993aacfd2751886514f0",
    "eip155Block": 0,
    "eip158Block": 0,
    "byzantiumBlock": 0,
    "constantinopleBlock": 0,
    "petersburgBlock": 0,
    "istanbulBlock": 0,
    "muirGlacierBlock": 0,
    "subnetEVMTimestamp": 0,
    "contractDeployerAllowListConfig": {
      "adminAddresses": ["0x8db97c7cece249c2b98bdc0226cc4c2a57bf52fc"],
      "blockTimestamp": 0
    },
    "contractNativeMinterConfig": {
      "adminAddresses": ["0x8db97c7cece249c2b98bdc0226cc4c2a57bf52fc"],
      "blockTimestamp": 0
    },
    "feeManagerConfig": {
      "adminAddresses": ["0x8db97c7cece249c2b98bdc0226cc4c2a57bf52fc"],
      "blockTimestamp": 0
    },
    "upgrades": {
      "precompileUpgrades": [
        {
          "feeManagerConfig": {
            "adminAddresses": null,
            "blockTimestamp": 1661541259,
            "disable": true
          }
        },
        {
          "feeManagerConfig": {
            "adminAddresses": null,
            "blockTimestamp": 1661541269
          }
        }
      ]
    }
  }
}

`eth_getActivePrecompilesAt`

DEPRECATED—instead use eth_getActiveRulesAt.

eth_getActivePrecompilesAt returns activated precompiles at a specific timestamp. If no timestamp is provided it returns the latest block timestamp. This API is enabled by default with internal-blockchain namespace.

Signature:

eth_getActivePrecompilesAt([timestamp uint]) -> {precompiles: []Precompile}

timestamp specifies the timestamp to show the precompiles active at this time. If omitted it shows precompiles activated at the latest block timestamp.

Example Call:

curl -X POST --data '{
    "jsonrpc": "2.0",
    "method": "eth_getActivePrecompilesAt",
    "params": [],
    "id": 1
}'  -H 'content-type:application/json;' 127.0.0.1:9650/ext/bc/Nvqcm33CX2XABS62iZsAcVUkavfnzp1Sc5k413wn5Nrf7Qjt7/rpc

Example Response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": {
    "contractDeployerAllowListConfig": {
      "adminAddresses": ["0x8db97c7cece249c2b98bdc0226cc4c2a57bf52fc"],
      "blockTimestamp": 0
    },
    "contractNativeMinterConfig": {
      "adminAddresses": ["0x8db97c7cece249c2b98bdc0226cc4c2a57bf52fc"],
      "blockTimestamp": 0
    },
    "feeManagerConfig": {
      "adminAddresses": ["0x8db97c7cece249c2b98bdc0226cc4c2a57bf52fc"],
      "blockTimestamp": 0
    }
  }
}

`eth_getActiveRulesAt`

eth_getActiveRulesAt returns activated rules (precompiles, upgrades) at a specific timestamp. If no timestamp is provided it returns the latest block timestamp. This API is enabled by default with internal-blockchain namespace.

Signature:

eth_getActiveRulesAt([timestamp uint]) -> {rules: json}

timestamp specifies the timestamp to show the rules active at this time. If omitted it shows rules activated at the latest block timestamp.

Example Call:

curl -X POST --data '{
    "jsonrpc": "2.0",
    "method": "eth_getActiveRulesAt",
    "params": [],
    "id": 1
}'  -H 'content-type:application/json;' 127.0.0.1:9650/ext/bc/Nvqcm33CX2XABS62iZsAcVUkavfnzp1Sc5k413wn5Nrf7Qjt7/rpc

Example Response:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": {
    "ethRules": {
      "IsHomestead": true,
      "IsEIP150": true,
      "IsEIP155": true,
      "IsEIP158": true,
      "IsByzantium": true,
      "IsConstantinople": true,
      "IsPetersburg": true,
      "IsIstanbul": true,
      "IsCancun": true
    },
    "avalancheRules": {
      "IsSubnetEVM": true,
      "IsDurango": true,
      "IsEUpgrade": true
    },
    "precompiles": {
      "contractNativeMinterConfig": {
        "timestamp": 0
      },
      "rewardManagerConfig": {
        "timestamp": 1712918700
      },
      "warpConfig": {
        "timestamp": 1714158045
      }
    }
  }
}

`validators_getCurrentValidators`

This API retrieves the list of current validators for the Subnet/L1. It provides detailed information about each validator, including their ID, status, weight, connection, and uptime.

URL: http://<server-uri>/ext/bc/<blockchainID>/validators

Signature:

validators_getCurrentValidators([nodeIDs]) -> {validators: []Validator}

Example Call:

curl -X POST --data '{
    "jsonrpc": "2.0",
    "method": "validators.getCurrentValidators",
    "params": {
        "nodeIDs": []
    },
    "id": 1
}'  -H 'content-type:application/json;' 127.0.0.1:9650/ext/bc/C49rHzk3vLr1w9Z8sY7scrZ69TU4WcD2pRS6ZyzaSn9xA2U9F/validators

nodeIDs is an optional parameter that specifies the node IDs of the validators to retrieve. If omitted, all validators are returned.

Example Response:

{
  "jsonrpc": "2.0",
  "result": {
    "validators": [
      {
        "validationID": "nESqWkcNXihfdZESS2idWbFETMzatmkoTCktjxG1qryaQXfS6",
        "nodeID": "NodeID-P7oB2McjBGgW2NXXWVYjV8JEDFoW9xDE5",
        "weight": 20,
        "startTimestamp": 1732025492,
        "isActive": true,
        "isL1Validator": false,
        "isConnected": true,
        "uptimeSeconds": 36
        "uptimePercentage": 100,
      }
    ]
  },
  "id": 1
}

validationID: (string) Unique identifier for the validation. This returns validation ID for L1s, AddSubnetValidator txID for Subnets.
nodeID: (string) Node identifier for the validator.
weight: (integer) The weight of the validator, often representing stake.
startTimestamp: (integer) UNIX timestamp for when validation started.
isActive: (boolean) Indicates if the validator is active. This returns true if this is L1 validator and has enough continuous subnet staking fees in P-Chain. It always return true for subnet validators.
isL1Validator: (boolean) Indicates if the validator is a L1 validator or a subnet validator.
isConnected: (boolean) Indicates if the validator node is currently connected to the callee node.
uptimeSeconds: (integer) The number of seconds the validator has been online.
uptimePercentage: (float) The percentage of time the validator has been online.

Edit on GitHub Report Issue

`eth_feeConfig`

`eth_getChainConfig`

`eth_getActivePrecompilesAt`

`eth_getActiveRulesAt`

`validators_getCurrentValidators`

On this page

Privacy Policy